Everyone grills in the warm weather, but if you’re looking to do some serious cooking for a group of people, whether it’s a huge pot of stew or a whole suckling pig, you’ll need something a little bigger. Thankfully, even if you have a small backyard, you can make your own fire pit or earth oven with a little elbow grease, some bricks, and some shovels. It’s a project, but the end result is delicious.

The beauty of a fire pit—especially the type that the folks at Food52 walk you through building—is that you can accomodate whole animals in it, multiple pots of delicious stews, chilis, or other goodies, and enough food to feed a large group of friends. You’ll need some bricks, a few supplies you can pick up at any hardware store, and some friends with shovels to make the pit reality. Once you’ve finished digging and lining your pit with bricks (firebricks, specifically), you’re ready to put the fire in the fire pit and do some serious earthen cooking, whether you decide to host a backyard Luau and cook a whole pig wrapped in banana leaves, or you bring your friends over for a huge chili cookoff.

This project may not require a huge backyard or a lot of depth, but you’ll definitely want some space where you can dig down a few feet safely, so we and the folks at Food52 suggest you only try this if you’re out in the burbs or know the ground you’re digging in. If you’re looking for a step-by-step, or some tips to cook in that fire pit once you’ve built it, hit the link below for details and cooking times. Ever dig your own fire pit? Think it’s too much effort? Let us know in the comments below.
How to build a Fire Pit In Your Backyard | Food52

to-do lists are just a nagging reminder of all the things you need to do, so actually inspiring yourself to do them isn’t always easy. Michael Pantalon, Ph. d, writing for Psychology Today, suggests that you’re more likely to accomplish these tasks by includingwhy you should do them as well.

We know what we have to do, as well as, when and where we have to do it, but, for some reason, we don’t think about why we want to or need to do it. That’s probably because we are under the spell of the “have-to’s” and forget we always have a choice.

Creating a “why do” list, as he calls it, can help you remember why you actually want to do something and avoid thinking that youhave to do it. When creating your lists, just make a sublist under each item filled with all the reasons this is something you really want to do. Don’t include items for the sake of including them, but instead focus on the things that make you excited about this task. It may be hard to inspire yourself to do the boring chore of laundry, but you can always find reasons. For example, you may have an exciting job interview coming up and you want to look your best, so it’s important to take care of cleaning your best clothes in advance. The item wouldn’t be on your list if there wasn’t some kind of motivation, so tap into why a task is important to you in the first place. If you can’t figure out why, it might not deserve to be on the list at all.

For more tips on actually finishing off the tasks on your list, read our guide on making your to-do list do-able.

Influence Yourself With a “Why-Do” List | Psychology Today

Photo by JohnKwan (Shutterstock).

[LINK]

You want to be organized and prepared when you’re walking around, but you don’t want to lug around 10 pounds of gear and ruin your back with a mega-wallet. These essential carry-around Tools are discrete, super-handy, and oh so brag-worthy.

photo by joelogon.

We’ve previously covered the gear our editors and readers find handy to carry in their “Go bags” and laptop bags, and some of those tools (like a certain USB key) cross into the pocket-worthy realm. Otherwise, we tried to stick to very small tools and printables that do a really good job for this roundup.

10. Foldable Organizer

The PocketMod webapp is more than a simple printout maker. It’s an expandable, customizable system for creating an 8-page, super-slim booklet with anything you want on any side. You can track your business mileage on one side while keeping your calendar and important contacts on another, or print out an entirely new pocket stuffed with travel maps and local attractions. Cool stuff, and definitely worth the wallet space. (Original post).

9. compact keychain

If you’ve only got a few keys, and an eye for something different, you don’t have to go with the typical ring-shaped chain. You really only need washers and a rivet to create a minimalist, quiet keychain. You can take it further by shaping those keys into a mini-Leatherman with a few tools kept in, attaching the rivets onto a money clip, orcrafting your own compact key device. (Original posts:compact keychain, mini-Leatherman)

8. Universal club card

Some stores require them, some stores provide discounts with them, and others offer passive rewards and points for using club/membership cards and bar codes. Combine all of your codes onto a single card with Just One Club Card, or choose between a card and keyring tab at KeyRingThing. Actually, the two sites seem to have gotten together, and now offer combination cards with a nice laminate finish and firm back, so you won’t have to worry about wear, tear, and faint barcodes. We love it when great webapps find each Other. (Original post: Just One Club Card, KeyRingThing)

7. Indestructible, keychain-friendly USB drive

Maybe you don’t need this exact model, but having a nearly-indestructible USB drive that fits on your keychain is convenient in ways you can’t quite fathom until you’ve added it. You’re almost never without a bit of storage for transferring or grabbing files. If you’re the PortableApps type, you’ve always got a working Firefox/Pidgin/Thunderbird setup handy for being productive on someone else’s system. At the moment, the 4 GB IamaKey sells for $22 directly, so it—or something like it—might make a great recommendation as a last-minute stocking stuffer. (Original post)
 

6. Compact calendar

Designer David Seah has been making “candy bar calendars” for some time now, and his 2010 compact calendar is just as beautifully efficient as ever. His are monthly calendars you line up and customize in Excel. If you’re looking for more of an all-in-one solution, try The Small Calendar 2010from Grafish Designs, or the Thumb Calendar 2010 Design, both of which offer clever ways of peeking at today, tomorrow, and the future from a wallet-sized slip of paper. (Original posts: The Small Calendar,Thumb Calendar).

5. A baby (or really cute pet) photo

Wallets get lost, left behind, and lifted more often than you’d like to think. If your wallet is more misplaced than stolen, having a very cute baby photo in your wallet, even if it’s not necessarily yours, seems to seriouslyboost your chances of getting it back. A not-too-close backup is having a cute pet picture. As they say in journalism school, every story (and wallet, maybe) needs a dog—or at least a really interesting human. Photo by °Eli.(Original post).

4. earbud de-tangler

Ever pull out your tangled, knotted headphones and wonder if they’re secretly holding gymnastics practice when they’re tucked away? Keep your earbuds, cords, and plugs in place with a de-tangling tool. Our inner stylist loves this laser-cut earbud owland its old-time-y wooden look, but you can also cut something similar from plastic. In fact, you can fashion an earbud holder out of a junk or expired credit card. If you’ve got no room for a single-purpose flat piece, at least train yourself in manual de-tangling methods like the devil horn wrap, thearound-the-player wrap, or get fancy with a daisy chain or chain sinnet style. (Original earbud owl post)

3. A darned good pen

Yeah, you still need to write now and again. Whether it’s a credit card receipt scrawl or a note you really want to be able to read later, having a pen that actually makes you want to write is always worth the price. We asked our script-friendly readers what pens they liked, and they came back with impressive results. In describing his trusted PenAgain, for example, Cowboy Bill wrote: “Helps my horrible handwriting. Busted knuckles from nuns’ rulers.” That’s an endorsement from the heart, or at least the memory of hands.

2. Multi-tool, credit-card or standard

We agree with Steve Sussex’s assessment of the Leatherman Micra—it’s just as useful to computer geeks as to outdoor types. If carrying an actual knife on your keychain won’t fly with security at work, or you don’t want to clutter it, consider the 11-function, credit-card-sized survival tool, alsorecommended by Cool Tools. You get a ruler, a knife and screwdriver plane that can work in a pinch, and, perhaps most helpfully, a bottle opener you never forget at home. Even if you forget to pull it from your wallet before a flight, it’s only around $5, and a fairly clever conversation starter. (Original posts: Leatherman Micra, credit card tool).

1. A backup system

The wallet is where you should keep all your essential IDs and cards, but it’s good to have a fallback plan for when you leave it at home, or in the cab. Inspired by a Real Simple article (now dead-linked) on using clear pockets and cords to separate ID badges, Gina wrote up a diet plan and backup system for your wallet, based on her own use of a Slimmy minimalist wallet and just the bare essentials. If you find yourself holding up the line to dig through a virtual filing cabinet of receipts and cards, consider putting your own money holder through boot camp.
 

What’s the most essential item on your own keychain, in your wallet, or loose in your jacket pocket these days? Share your stuff in the comments.

If you’ve never done it before, the idea of building a computer from the ground up can seem very intimidating—but it’s one of the most satisfying projects a Tech enthusiast can take on.

Being more of a software gal than a hardware geek myself, I was the only Lifehacker editor who had never built a PC from scratch. So when I needed a new PC late last year, I took the plunge and built my custom system. I’m so glad I did—the project turned out to be one of my proudest accomplishments of 2008. If you’ve cracked open your PC before to install a new hard drive or TV capture card, but you’ve never built a whole new system from the ground up, it’s not as difficult as you might think. Here are my notes for first-timers who want to build instead of buy their next computer.

Why Build Instead of Buy

“But computers are so cheap these days,” you say. “Why waste the time and energy building your own system when you can get a great machine fully assembled and shipped to your door?” that’s a great question. Building your own PC will not save you time. It might save you money, but that’s not even the best reason to do it. For me, it was a fantastic hands-on educational experience. It gives me a deep sense of satisfaction every single day when I press the power button on my tower, watch it light up, and know that I plugged in the wire that goes from that light to the motherboard. Building your PC takes the mystery out of what’s going on inside that black box you spend hours on per day.

There are other good reasons to build instead of buy, too. With your own build you can customize your system just how you like and make your perfect media center or gaming machine. You can save money if you already have some parts (though see my warnings on the dangers of a “Frankenbuild” below). Upgrading your PC in the future becomes easier and cheaper since your parts aren’t tied to a particular manufacturer. With a custom build you can do fun stuff like overclock your CPU and get more bang for your buck, or install OS X where it was never intended to run.

In short, building your own PC makes you feel like a badass.

What You’re Getting Into

Don’t get me wrong, though: building a PC (for the first time especially) takes research, time, gumption, patience, and a willingness to deal with several WTF moments. If you’ve never cracked a PC’s case and installed parts, like a new hard drive or a video card, start there first. If you’ve got that experience under your belt, you might think that building a new PC is just a matter of snapping together a few parts. It is, but building from the ground up takes much more than an hour or two. My build took two full days, one online order, one returned motherboard, two trips to Fry’s, one condescending sneer from a sales associate when I asked a newb question, and one trip to Radio Shack. If that sounds like a lot, well, it was, and there were moments in the process when I wished I’d just bought a Dell. But when it finally all came together, all the sweat makes the results even sweeter.

Where to Start: Researching and buying Your Parts

You scared off yet? No? Good. Let’s get down to it. There are a gadzillion articles on the internet about building your own PC, but many are way out of date, or just don’t get specific about what exactly you should buy. When I had to start researching what parts to purchase, of course I turned to savvy Lifehacker readers to help me out. Several readers mentioned Ars Technica’s excellent system buyer’s guide, which breaks down exactly what parts you’d want for one of three levels of computer: a “budget box,” a “hot rod,” or a “God box.” The 2008 guidepublished last fall; make sure you use the most recent one when you start your research. I started by plugging parts from Ars’ “hot rod” system list into Newegg to get a sense of price and see if there were any deals, coupons or upgrades. In the end I didn’t use Ars’ exact recommendations, but it was an awesome, up-to-date, jumping-off point.

Your research into parts is the most important stage of the process. For first-timers it can be bewildering, and you will have questions. Just keep reading, take notes, consult with forums or sales associates, and remember that if you make the wrong purchase you can always return it for the right one. In the photo to the left you’ll see my build’s case, motherboard, power supply, CPU, and RAM. (I had a video card, DVD drive, and a hard drive from an old machine I planned to use in my new build.)

See this entire comment thread for more resources on deciding what parts to buy for your budget.

Get Down and Dirty

Once you’ve got your hot little hands on all the parts you need, the real fun begins. There are two stages to your build: the hardware stage, and the software stage. Adam’s already covered how to install each individual hardware component. Here’s the list:

• Install the motherboard and CPU
• Install your RAM
• Install the video card
• Install the hard drive and DVD drive

Once you’ve got everything plugged in and mounted inside your case, leave the case sides off and plug in your keyboard, mouse, monitor, and power, and press the On button. This is the moment of truth. The first time you see the lights come on and the system setup appear on-screen, you’ll feel like you’ve just arrived at the top of Mount Everest.

If the machine doesn’t power on, or there’s no video signal, or the keyboard doesn’t work—just unplug everything and check your connections. It took me a few hair-pulling, teeth-gnashing attempts to get my new build to boot properly. If it doesn’t work the first time, take a breath, unplug it all, and try again. Don’t cry; that won’t help.

Once you’re into the machine’s BIOS setup, key around and make sure the motherboard recognizes your DVD or CD drive and your hard drive. You’ll need those working in order to install your operating system. Everything there? Now set your boot sequence to check your optical drive first. Insert your operating system’s disc into your CD or DVD drive, and restart the machine. Now your operating system’s setup will launch on boot, and you can install away.

In the meantime, blast very loud rock music, strut about the vicinity, arms upraised, and revel in your greatness.

Mistakes I Made That You Can Avoid

When you build your first PC, keep a few things in mind I wished I’d realized before I started.

• Beware of the “Frankenbuild.” A great way to save money on your new PC is using parts that you’ve already got around. But I was overly optimistic about what items from my very old Dell tower would work in my new system. I assumed my hard drive would work (it did, but it was an IDE drive, which I wound up replacing with a faster SATA model), I hoped my video card would work (it didn’t), and I thought my DVD drive would work (it did). In the end I wound up buying parts I thought I’d be able to reuse, so my total price wasn’t as low as my initial estimate.
• Expect mishaps. I bought the wrong motherboard. Well, not the wrong one, but one that didn’t have a FireWire port, which I wanted. Well, I had a FireWire card, but it didn’t fit into the motherboard. Anyway, I figured all this out after I installed the CPU, which meant I had to remove it from the board, break the thermal compound seal, and ship the motherboard back. When I got the new motherboard and reinstalled the CPU, because the thermal compound left there didn’t work anymore, the machine would start and within 10 seconds overheat and shut itself off. Next thing you know I’m scraping hardened thermal compound off the CPU with Goof Off and a credit card, and reapplying fresh from a tube I had to pick up from Radio Shack. Lesson: there will be mishaps. Expect crap to go wrong. Be confident in your ability to fix it after you Google the solution to the problem hundreds of people have had before you did.
• Read the frakkin’ manual. With years of tinkering in my PC’s case under my belt, I went into my build eager to start working and only skimmed the user guides and online howto’s before I started. Don’t do that. Open and read the full-on manual that comes in the box with every single one of your parts. If you’re not sure about something said manual includes, do your research before you plug anything in.
• Buy locally if you can. My initial parts order was from Newegg, which was great price-wise, but really sucked when I had to return my motherboard, because I had to pay shipping fees and a restocking fee. With a Fry’s down the road, I regretted not just buying everything at the store itself from the get-go to to make returns easier.
• Give yourself lots of time. I wrongly assumed I’d be able to finish my build in a day, but it took two whole days and stressed me out because they were work days. Don’t build a new PC when you’re on deadline or otherwise pinched for time. Give yourself a whole weekend and a clean and spacious work area that you can leave filled with packing debris and electronic parts strewn about for a few days.

Have you built your own PC? Are you considering taking the leap? Let us know how it went or what you’re thinking in the comments.